Starlane

What changed

Starlane is built in the open and mostly built from the signal board. Ideas from players are marked, with what shipping them paid.

Finding what works

UA134

2026-10-07

  • Before an enquiry, the bench now runs trials. Every field has three things a run depends on: an agent, such as a dopant, a gain medium or a flux, and two conditions, such as a temperature, a pressure or a time. One combination works, and the bench does not tell you which.
  • Pick a setting for each and run a trial. It reads a yield: two points for each factor exactly right, one for a setting a step off. Read the yields and narrow it down until a trial comes back clean. Your trials are kept, so you can stop and come back.
  • A clean series in par trials adds the same nine points the lattice did to the enquiry in that field, and three fewer for each trial over. From your second enquiry come a strict agent, then finer settings, then a rough gauge that reads only low, middling or high. It is still optional and free. It replaces the alignment lattice, which is also gone from the front page.

Running the shop

UA133

2026-10-07

  • Making a batch is now a job you schedule. The workshop is five machines: a lathe and a curing oven that run on their own, and a press, a soldering station and an assembly jig that need your hands. Each batch is a work order of three or four parts, each going through its own three jobs before they are fitted and cured.
  • You choose the order the work goes out in. Each job starts as soon as its machine, its part and your hands are free, so load the long jobs early and do the hand work while they run. The board shows every machine's queue as you build it.
  • From your second batch come tool changeovers, then hot parts that must cool, then an oven that has to preheat. A schedule at par runs any batch at 85% of its clock, and every recipe quotes its scheduled minutes beside the usual ones. Making a batch without one works exactly as before.

Skimming the giant

UA132

2026-10-07

  • A gas draw is now flown. Your ship dips its scoop into the giant's clouds once an orbit, and you choose how deep: haze, ammonia, sulphide, water cloud or the deep air. Deeper is denser, so the scoop fills faster.
  • Deeper is also hotter, and it drags. The shield heats on every dip, and a deep one pulls your orbit lower. A lower orbit means a shorter climb out, which sheds less heat. A burn puts the orbit back at the top for one orbit with no gas.
  • The giant turns under you. An upwelling brings the gas a deck nearer and a downdraft takes it away. From your second draw come storm towers, then shear at the weather's edges, then a trim limit. At par a draw still runs at 75% of its clock, and the routine is unchanged.

Programming the furnace

UA131

2026-10-07

  • Every batch at the smelter is now a program. Each process has its real stages: ore is dried, roasted, reduced and tapped; steel is decarburised and tempered; deuterium is condensed and distilled in a cryostat at −255°. You program the machine through them a step at a time.
  • A furnace runs on. The step after a hard heat climbs another band, so ease into a narrow window or you sail straight through it. A stage only soaks inside its window.
  • One rule more on each of your first runs: the atmosphere (purge between air and the process gas), the lining (no hard heat at the top), and scorching. At par a batch still runs at 75% of its clock, and the routine is unchanged.

The breaker's plan

UA130

2026-10-07

  • Stripping a wreck now means planning it like a shipbreaker. The wreck is laid out stern to bow over its own picture, with the avionics bay toward the bow, the power cells aft, and every fitting drawn with its material's icon.
  • One real rule more on each of your first wrecks. Frames are slow to cut, except through their lightening holes. Cut the keel and whatever hangs beside it falls away, so strip it first. A sealed compartment has to be vented from the hull's edge, or the blowout takes it.
  • At par a strip still runs at 88% of the standard clock, and the standard cut is unchanged for anyone who would rather not plan.